Flange stopper punches
Description
Ask For Quote
Product name | Flange stopper punches |
Standard | JIS |
Manufacturer | MQ Mold |
Place of origin | Ningbo, China |
Material | P-HSS |
Hardness | 64~67HRC |
Mode | Factory & trade |
1. The tip end is ground before the coating is applied.
2. The tip edge of an HW coating or DLC foundation WPC type are very slightly rounded.
Processing | Material | Hardness | Type | B | |||
Normal | P-HSS | 64~67HRC | PHTAL |
| |||
TiCN coating | |||||||
HW coating | |||||||
DLC coating | |||||||
DLC foundation WPC |
Type | D | L | 0.01mm increments | T | 1mm increment | V | R |
10mm increments | min. P max. | ||||||
PHTAL | 4 | 40 | 0.50(1.00)~2.00 | 13 16 20 | 2~6 | 2 | 2~3 |
50 | 13 16 20 25 | 2~6 | |||||
5 | 40 | 1.00~3.00 | 13 16 20 | 2~8 | 3 | 10 | |
50~60 | 13 16 20 25 | 2~8 | |||||
6 | 40 | 1.50~4.00 | 13 16 20 | 2~10 | 4 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
8 | 40 | 2.00~6.00 | 13 16 20 | 2~10 | 6 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
10 | 40 | 3.00~8.00 | 13 16 20 | 2~10 | 8 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
13 | 40 | 3.00~10.00 | 13 16 20 | 2~10 | 11 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
16 | 40 | 6.00~13.00 | 13 16 20 | 2~10 | 14 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
20 | 40 | 10.00~16.00 | 13 16 20 | 2~10 | 18 | ||
50~70 | 13 16 20 25 | 2~13 | |||||
25 | 40 | 13.00~23.00 | 13 16 20 | 2~10 | 23 | ||
50~70 | 13 16 20 25 | 2~13 |
