Shoulder punch with flat shank
Description
Ask For Quote
Product name | Shoulder punch with flat shank |
Standard | JIS |
Manufacturer | MQ Mold |
Place of origin | Ningbo, China |
Material | V30, super fine grain... |
Hardness | 90-92HRA |
Mode | Factory & trade |
1. The tip end of a TiCN coating punch is ground before the coating is applied.
2. Although the marks of processing may remain in the center of a flange end face, it is satisfactory on a function.
Shank diameter. Tolerance | Material | Hardness | Type | Tip shape | B | ||||
Normal | TiCN coating | ||||||||
D +0.005 0 | V30(HIP) | 88~89HRA | G-WP | GH-WP | A |
| |||
Super fine grain | 90~92HRA | G-WXP | GH-WXP | ||||||
Type | Tip shape | B | D | L | 0.01mm increments | 0.01mm increment | B | H | |||
A | D R E G | R | |||||||||
10mm increments | min. P max. | P·Kmax | W max. | P·Wmin | R | ||||||
G-WP | A | S | 3 | 40~70 | 1.000~1.800 | - | - | - |  | 8 | 5 |
4 | 40~70 | 1.000~2.800 | 3.97 | 2.80 | 1.50 | 7 | |||||
5 | 40~70 | 2.000~3.800 | 4.97 | 3.80 | 1.50 | 8 | |||||
6 | 40~70 | 2.000~4.800 | 5.97 | 4.80 | 1.50 | 9 | |||||
8 | 40~80 | 3.000~5.800 | 7.97 | 5.80 | 2.00 | 13 | 11 | ||||
10 | 40~80 | 3.000~7.800 | 9.97 | 7.80 | 2.50 | 13 | |||||
13 | 40~80 | 6.000~10.800 | 12.97 | 10.80 | 3.00 | 16 | |||||
16 | 40~80 | 10.000~13.800 | 15.97 | 13.80 | 4.00 | 19 | 19 | ||||
L | 3 | 50~70 | 1.000~1.800 | - | - | - | 13 | 5 | |||
4 | 50~70 | 1.000~2.800 | 3.97 | 2.80 | 1.50 | 7 | |||||
5 | 50~70 | 2.000~3.800 | 4.97 | 3.80 | 1.50 | 8 | |||||
6 | 50~70 | 2.000~4.800 | 5.97 | 4.80 | 1.50 | 9 | |||||
8 | 50~80 | 3.000~5.800 | 7.97 | 5.80 | 2.00 | 19 | 11 | ||||
10 | 50~80 | 3.000~7.800 | 9.97 | 7.80 | 2.50 | 13 | |||||
13 | 50~80 | 6.000~10.800 | 12.97 | 10.80 | 3.00 | 16 | |||||
16 | 60~80 | 10.000~13.800 | 15.97 | 13.80 | 4.00 | 25 | 19 | ||||
