Spool retainers for mould components
Description
Ask For Quote Spool retainers are essential mold components for manufacture. A small size mould even needs more than ten pairs of spool retainers.
The precision request for spool retainer sleeve is very high. In order to keep stable operation during manufacturing, the height of the spool retainers used on the same mould must be extremely equal, which tolerance should be within 0.01mm. If the dimension error is too big, there would happen some accidents, like the stripper plate is difficult to strip from the body, or the punch pin may break off. They could not only prevent the stripper plate from falling off, but also ensure the stroke for stripping, which make mold release smoothly.
There are lots of specification for spool retainers , please send your demands to us, and we will match the correct one for you.
Product name | Spool retainers for mould components |
Item No. | / |
Manufacturer | MQ Mold |
Place of origin | Ningbo, China |
Material | S45C |
Hardness | HRC 38-43 |
Mode | Factory & trade |
| De9 | d1 | d2 | d3 | M*P | h | T | l | ||
| 10 | -0.025 -0.061 | 10 | 15 | 6.3 | 6*1.0 | 6 | 5 | 10 | |
| 13 | -0.032 -0.075 | 13 | 18 | 8.4 | 8*1.25 | 8 | 5 | 15 | |
| 16 | 16 | 24 | 10.6 | 10*1.5 | 10 | 8 | 22 | ||
| 20 | -0.040 -0.092 | 18 | 28 | 12.6 | 12*1.75 | 12 | 10 | 20 | |
| 25 | 24 | 36 | 16.8 | 16*2.0 | 16 | 13 | 27 | ||
| 32 | -0.050 -0.112 | 30 | 45 | 20.8 | 20*2.5 | 20 | 16 | 34 | |
| Type | D | L | |||||||
| CSR | 10 | 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 | |||||||
| 13 | 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 | ||||||||
| 16 | 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 130 140 150 160 170 180 | ||||||||
| 20 | 30 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 130 140 150 160 170 180 | ||||||||
| 25 | 40 45 50 55 60 65 70 75 80 85 90 100 110 120 130 140 150 160 170 180 200 | ||||||||
| 32 | 60 70 80 90 100 110 120 130 140 150 160 170 180 200 | ||||||||
| Applicable CSR standard | H | T | A | D | R | Catalog No. | L 10mm increments | S 5mm increments | ||||
| Type | D | Type | d | |||||||||
| CSR | 10 | 36 | 5 | 16 | 28 | 1.0 | CSRE | 10 | 50~100 | 10~25 | ||
| 13 | 40 | 5 | 19 | 30 | 13 | |||||||
| 16 | 46 | 8 | 25 | 36 | 16 | |||||||
| 20 | 55 | 10 | 29 | 44 | 20 | |||||||
| 25 | 60 | 13 | 37 | 50 | 25 | 60~100 | ||||||
| 32 | 70 | 16 | 46 | 60 | 1.5 | 32 | ||||||
