Nylon parting locks for mould
Description
Ask For Quote Nylon parting locks are used to lock A plate and B plate before runner are released out from A plate, which is widely used on plastic mould. It also can be installed into small, medium size, and 2-sectional injecting metal pipes, or can be installed on sliding bases.
Nylon resin parting locks is easy to assemble and disassemble, and cost efficient. The friction between mould plate and parting locks could be adjusted by sloping screw. Its diameter depends on mould base size
Nylon parting locks are in simple structure and light weight, but have important effect in practical usage. It is composed of an orange outer casing in Nylon resin and an inner screw in brass.
Product name | Nylon parting locks for mould |
Item No. | / |
Manufacturer | MQ Mold |
Place of origin | Ningbo, China |
Material | Nylon |
Hardness | HRC 58-62 |
Mode | Factory & trade |
Code | D | d1 | M | B | L | H |
PLA | 10 | 8.5 | 5 | 4 | 18 | 3 |
12 | 11.5 | 6 | 5 | 20 | 4.5 | |
13 | 11.5 | 6 | 5 | 20 | 4.5 | |
16 | 14 | 8 | 6 | 25 | 4.5 | |
20 | 16 | 10 | 6 | 30 | 5.5 |
